fishing gloves

General musky fishing discussions and questions.

Moderator: Cyberlunge

Post Reply
finlander
Posts: 438
Joined: Fri Apr 22, 2005 10:20 pm
Location: muskegon

fishing gloves

Post by finlander »

Anyone have a type/brand they have used that will keep your hands warm on cool spring and fall days? Saw the name "Glacier Gloves" mentioned somewhere recently. Wonder if there is a type good for casting? Thanks.
Slimeball
Posts: 314
Joined: Fri Apr 22, 2005 1:47 am

Post by Slimeball »

Was just in the boat with Tony Grant last week discussing this very thing. He wears batting gloves with surgical (latex) gloves underneath. Swears by it.
I just wear the fingerless wool gloves.

Jason
Bomba
Posts: 615
Joined: Thu Apr 07, 2005 6:19 am
Location: Birch Run

Post by Bomba »

I also wear the fingerless wool gloves.
Don Bomba




"PASS IT ON"
pikerule2
Posts: 785
Joined: Mon Nov 21, 2005 1:57 pm
Location: Battle Creek, MI

Post by pikerule2 »

Have some Cabela's Goretex gloves that are decent but not waterproof enough, likewise with some neoprene types I've tried. Tried Sealskinz and was disappointed, coldest damn gloves I've ever owned. So still looking for a better option and will try that tip from Tony Grant, thanks Jason.
Larry Porter
Posts: 845
Joined: Mon May 02, 2005 9:40 am
Location: Hastings MI

Post by Larry Porter »

I use a wool glove underneath with a nitrile sized glove over it. I used to use latex on top but they were a little tight. With the latex allergy deal in medical supplies, now nitrile is the non-allergic option for medical gloves. You need to get the largest sized nitrile glove you can, not a one-size-fits-all. I use Best #8005XL from magidglove.com, they are $12 per 100.
For comparison, I usually do okay gloveless down to about 43 or 44 degrees air temperature, and the gloves give me another 8 or 10 degrees lower than that, if the wind isn't too stiff.
finlander
Posts: 438
Joined: Fri Apr 22, 2005 10:20 pm
Location: muskegon

gloves

Post by finlander »

Wow! More responses than i thought I'd get. I have a box of latex gloves that I use when mixing epoxies and Etex. I'll pick up some baseball gloves first and try that setup. Neoprene doesn't make it, so a friend told me. He tried them. Again, thanks for the tips. Bruce
Cyberlunge
Site Admin
Posts: 874
Joined: Mon Apr 25, 2005 9:57 am
Location: Traverse City

Post by Cyberlunge »

I also have a set of kayaking gloves that work well because they are thin and designed to get wet. That might be an alternative to batting gloves if you dont like the design of them. Neoprene blows because the line cuts it like butter (and so do fish teeth..OOWWW). I have also found some great outdoor gear in the climbing/adventure stores like Eastern Mountain Sports.
Kevin
John E. Sox
Posts: 218
Joined: Sun Apr 24, 2005 5:25 pm
Location: Yoop

Post by John E. Sox »

I have an old pair of football reciever's gloves that work well. I can't stand to wear anything bulky or stiff (like neoprenes). I have a ton of Jersey gloves that I will bring and just take them off if they get wet or frozen. One tip that I think works great is to tighten down your tension on your reel so you don't have to thumb the spool near as much. This will keep your hands dry for longer. Also, I use my foregrip almost exclusively on cold days to keep my hands off my cold reel.
Post Reply